Table of Contents
Advertisement
2.
3.
PROG...
4.
On
6s
Winter
Summer
6s
ENANCER Electrónica S.A.
Rua Max Grundig 9
4705-820 Braga Portugal
Tel: +351 253 221 484
Ideal winter temperature
1. Keep the key PROG pressed during 2 seconds.
2. Now press the button
the actually selected temperature. If two LEDs (e.g. 20º and 22º) light up; this
means that the selected temperature is in the middle, e.g. 21º.
3. Press PROG to select the next temperature. Pressing PROG repeatedly
increases the temperature until the turnaround point and return to the lowest
temperature. You can select a temperature from 19ºC until 24ºC in 1ºC steps.
4. Confirm the selection by pressing
Ideal summer temperature
-
Keep de key PROG pressed during 2 seconds.
-
Press the button
actually selected temperature.
-
Press PROG to select the next temperature. Pressing PROG repeatedly
increases the temperature until the turnaround point and return to the lowest
temperature. You can select a temperature from 20ºC until 25ºC in 1ºC steps.
-
Confirm the selection by pressing
Selection of Winter and Summer cycle
The OTC-TERMO can work during winter (heating control) as well as during summer
(cooling control).
To select the Winter mode, proceed as follows:
1. Switch on the unit with the button
2. Keep the
key pressed during 6 seconds: you will hear a beep to indicate that
the mode was selected.
To select the Summer mode, proceed as follows:
-
Switch on the unit with the button
-
Keep the
key pressed during 6 seconds: you will hear a beep to indicate that
the mode was selected.
: The LED of the temperature scale light up indicating
.
: The LED of the temperature scale light up indicating the
.
.
.
Page 9 of 13
info@only-smartbuildings.com
www.only-smartbuildings.com
Advertisement
Table of Contents
