Table of Contents
Advertisement
1234567
01H07H20º
1234567
06H18H18º
1234567
18H23H18º
1234567
3-WINTER
1234567
4-SUMMER
1234567
LOCAL
1234567
DAYS
1234567
_ _-_ _-_ _º
1234567
01H07H24º
1234567
06H18H25º
1234567
18H23H22º
1234567
4-SUMMER
ENANCER Electrónica S.A.
Rua Max Grundig 9
4705-820 Braga Portugal
Tel: +351 253 221 484
If there is no programme defined "_" will appear on all positions. This is also the way
to delete a programme from a day, by selecting "_" in all digits.
With
and
select the digit you wish to change and with
the desired value.
When the period is defined, validate it with
periods.
It is not mandatory to define 3 periods for a particular day of the week. It is also
possible not to define any programme for some days.
Once the 3rd programme is finished, press
4. Summer programme
The summer programme defines the operating hours of the climatization and its
respective target temperatures.
It is possible to define, for each day of the week, 3 operating periods. You can, for
the same day of the week, define overlapping periods, where the lower temperature
prevails.
The starting time of a period has to be before the end time.
0
6
12
P
P
1
2
Period 1 does not have to start before period 2 or 3.
To adjust the summer programme press
The option LOCAL allows you to define the programme on the local unit. If there are
OTC-TERMO's installed you can choose here which unit you wish to programme
using the
and
keys, and validating with the
You can now select the day of the week you wish to edit with the
Going to the right, you can select all days of the week, only Monday to Friday or only
the Weekend. In this case of multiple days of the week you cannot edit the
programme that was already defined for one particular day, always starting the same
programme pattern.
If you select a single day of the week and validate with
programme of this day on the display. The bar below the 1 blinks indicating the
programme number.
If there is no programme defined "_" will appear on all positions. This is also the way
to delete a programme from a day, by selecting "_" in all digits.
With
and
select the digit you wish to change and with
the desired value.
When the period is defined, validate it with
periods.
It is not mandatory to define 3 periods for a particular day of the week. It is also
possible not to define any programme for some days.
Once the 3rd programme is finished, press
, repeating the steps for the remaining
to save.
18
24
P
3
within the option 4-SUMMER.
, repeating the steps for the remaining
to save.
and
you can select
key.
and
you will see the 1st
and
you can select
Page 6 of 13
info@only-smartbuildings.com
www.only-smartbuildings.com
keys.
Advertisement
Table of Contents
