Factory Default - Only Climatization User Manual

ENANCER Electrónica S.A.
Rua Max Grundig 9
4705-820 Braga Portugal
Tel: +351 253 221 484

FACTORY DEFAULT

VERY IMPORTANT:
The ONLY climatization units have to be configured according to the installation in
which they are used. This configuration should be done by the installer because it
depends on the installation architecture and the physical connections made.
Therefore, you should never reset to the factory default settings, because the unit
will no longer function.
To reset the unit to the factory default, press PROG for more than 10 seconds. At the
end you will hear a long BEEP.
Page 13 of 13
info@only-smartbuildings.com
www.only-smartbuildings.com