Table of Contents
Advertisement
1234567
5-INSTAL
1234567
T01
1234567
T01 OK
1234567
T02
1234567
T02 OK
1234567
5-INSTAL
1234567
09:58 23º
1234567
6-REMOVE
1234567
T01
1234567
T02
1234567
T01
1234567
6-REMOVE
1234567
09:58 23º
ENANCER Electrónica S.A.
Rua Max Grundig 9
4705-820 Braga Portugal
Tel: +351 253 221 484
5. Installation of OTC-TERMO
The OTC-TERMO units do not have an LCD but can be programmed using the OTC-
CLIMA. For this the OTC-TERMO must be installed on the OTC-CLIMA.
To install an OTC-TERMO press
The display shows T01 (Termo 01).
Now you should go to the first OTC-TERMO and press the key
OTC-TERMO send a command and as such stay associated to the OTC-CLIMA.
On the display of the OTC-CLIMA appears T01 OK.
If you wish to install more units you should now select T02 with the
the procedure, this time with the new unit.
When installation is finished press
To set the programme for the OTC-TERMO units you should select the respective
number (e.g. T01) with
programme is now exactly the same as the local unit, except that the programme is
afterwards stored in the respective unit.
Note: If a name was assigned to the OTC-TERMO (only possible with a computer)
this name will appear instead of T01.
6. Removing an OTC-TERMO
It may be necessary to remove an OTC-TERMO from an OTC-CLIMA. In this case
press
within the option 6-REMOVE.
With the keys
and
selected the one you wish to delete, press
This unit is now removed, and you are no longer able to edit its programme.
within the option 5-INSTAL.
to leave the menu.
and
, and validate it with
you can navigate between the installed units. Once you have
to validate.
. This makes the
key and repeat
. The definition of the
Page 7 of 13
info@only-smartbuildings.com
www.only-smartbuildings.com
Advertisement
Table of Contents
