CycleOps PowerBeam Pro User Manual page 14

5.3.2 Manual Calibration
If you own a PowerTap power meter, you can per-
form a manual calibration to more accurately cali-
brate your CycleOps PowerBeam
the power meter to your handlebars so you can read
both the PowerTap CPU as well as the CycleOps Pow-
TM
erBeam computer.
1. Before entering the calibration routine, warm
up the CycleOps PowerBeam
system for fi ve minutes.
2. From the main menu, choose Setup Mode.
3. From the setup menu, choose Calibration.
4. From the calibration menu, choose Manual Cali-
bration.
5. The CycleOps PowerBeam
plays the measured power using the current
rolling resistance calibration. Pedal at a constant
speed to stabilize the resistance. Target 20 mph.
6. Use the up and down arrow buttons to adjust the
calibration until the displayed power matches
your PowerTap CPU. Pressing the up arrow but-
ton will increase the measured power while
pressing the down arrow button decreases the
measured power.
7. When the two values match, press mode or select
to exit the calibration.
8. The unique rolling resistance calibration is now
incorporated into the factory calibration. This
calibration will remain in the system until anoth-
er calibration is performed.
Note: The Roll Down Calibration and the Manual Cali-
bration adjust the same calibration values. Only the
last calibration values are held in memory.
10
TM
Pro trainer. Attach
TM
Pro by riding the
TM
Pro computer dis-
5.4: Options
This choice allows you to customize the CycleOps
TM
PowerBeam Pro computer display. Use the arrow
buttons to scroll down to the option you desire and
press select to choose it.
5.4.1: Time/Date
This option allows you to set the time and date.
5.4.1.1: 12-24 Clock
Choose between displaying a 12 or 24 hour clock.
5.4.1.2: Time
Use the arrow buttons to increase or decrease the
time. Use the select button to choose hours or min-
utes.
5.4.1.3: Date
Use the arrow buttons to increase or decrease the
date. Use the select button to step through the
month, day or year.
5.4.2: Backlight
This option enables you set when the display's back-
light will come on. Use the arrow buttons to choose
the option you like best and press select to choose it.