Deep Print Head Cleaning - Canon TS700 Series Online Manual

Deep Print Head Cleaning

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean
the print head deeply only when necessary.
1. Check that printer is turned on.
2. Press the Setup button, use the
button.
LCD and Operation Panel
3. Use button to select Deep Cleaning and press OK button.
The printer starts cleaning the print head deeply.
Do not perform any other operations until the printer completes the deep cleaning of the print head. This
takes about 1 to 2 minutes.
4. Check the print head condition.
To check the print head condition,
If a particular color is not printed properly,
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.
If the problem is still not resolved, the print head may be damaged. Contact your nearest Canon service
center to request a repair.
button to select Maintenance, and press the OK
print the nozzle check pattern.
replace the ink tank
121
of that color.