Palm Sprint Pixi User Manual page 96

Regulatory Submission (10.26.09). Palm, Inc. Confidential. Top Secret.
3.
If you want to stop using the headset, do any of the
following:
Switch from the headset to your phone's speaker:
Tap and tap
Speaker
Switch from the wired headset to a previously
®
paired Bluetooth hands-free device:
tap the device name.
Use your phone without the headset:
the headset.
Set Up and Use a Bluetooth
Device
Your phone is compatible with many headsets and car
kits (sold separately) enabled with Bluetooth
technology version 2. 1 , with EDR and stereo (with
AVRCP media controls).
After you set up a connection with a Bluetooth headset
or hands-free car kit, you can communicate using that
device whenever it is within range and the Bluetooth
feature on your phone is turned on. The range varies
greatly, depending on environmental factors. The
maximum is about 10 meters.
96 2D. Phone
.
Tap and
Disconnect
®
Hands-Free
®
wireless
Note:
You can use a stereo (A2DP-enabled) Bluetooth
headset or speakers to listen to music files on your
phone. You cannot, however, use a mono Bluetooth
headset to listen to music files.
1.
Open .
Bluetooth
2. If the Bluetooth setting at the top of the screen is
off, tap to switch the Bluetooth feature from Off
Off
to On.
3.
Tap and tap the device name.
Add device
4.
To use a Bluetooth device with your phone, follow
the instructions that came with the Bluetooth
device.
5.
To switch to another Bluetooth device while on a call:
Tap and tap the new device name. (You can
also tap or
Handset Speaker
without the headset.)
Tip:
If you make a Bluetooth connection with a car kit, you
might get a notification on your phone asking if you want
to upload contacts to the car kit. Tap
contacts. If you later want to delete the contacts from the
car kit, check the car kit documentation for instructions.
to use your phone
to upload
Allow