Fluke Datapaq TP3 User Manual page 13

For datapaq tracker systems with insight software
Table of Contents

Advertisement

Thermocouples
Analog inputs:
Current
Voltage
Operating temperature
(of the logger itself)
Humidity range
Operating pressure
(excluding limitations on
battery)
Real-time monitoring
Data capacity
Hot-data protection
Logger reset
Sample interval:
1
No telemetry
Hardwired telemetry
Radio telemetry
2
Data-collection start
Pre-trigger data stored
Multiple runs
Multiple events
Communications
PC/software compatibility See p. 37.
DATAPAQ TP3
Available for a single thermocouple type, or for combinations of
up to three types: B, J, K, N, R, S, T (see specifications for each,
below).
See p. 29.
Measurement range 4–20 mA.
Accuracy ±0.1% at 24°C/75°F.
Measurement range 0–10 V.
Accuracy ±0.1% at 24°C/75°F.
Dependent on battery type:
Rechargeable
−40°C to 70°C/−40°F to 158°F.
Alkaline
−40°C to 55°C/−40°F to 131°F.
Lithium
−40°C to 110°C/−40°F to 230°F.
0–100% non-condensing.
10
−7
bar at 20°C to 20 bar at 110°C
1.5 × 10
−6
psi at 68°F to 290 psi at 230°F
Hardwired (serial) telemetry via communications lead (p. 55),
or via Bluetooth (p. 32), as standard.
Radio (RF) telemetry via optional built-in transmitter.
Over 3.6 million data-points in total, plus associated pre-trigger
data (see p. 54) and calibration data. This is sufficient for, e.g., 10
runs of 10 hrs with 10 probes and sample interval 5 sec. Using
fewer probes (see p. 43) increases the possible run-time.
By non-volatile memory, and software warning if reset attempted
before download.
By Insight (p. 41) or by start button (using previous reset
options) (p. 47).
1–3 channels
0.1 s to 50 min.
4–9 channels
0.2 s to 50 min.
10 channels
0.3 s to 50 min.
11–20 channels 1 s to 50 min.
1–10 channels
1 s to 50 min.
11–20 channels 2 s to 50 min.
1–20 channels
2 s to 50 min. In Japan, 4 s to 50 min.
No trigger, Start button, Date and time, Rising temperature,
Falling temperature.
Yes (configurable; see p. 53).
Collect data from up to 10 runs before downloading (see p. 45).
Up to 10 events (different probe selections, sample intervals and
trigger modes for different stages of a profile run; see p. 45).
USB 2.0, Mini-B socket.
Bluetooth (p. 29) (not available in all countries).
Specifications and Operation
cont. >>
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents