Makita HM1202 Technical Information page 7

< 5> Mounting of fluoride ring
(Mounting)
(1) Fluoride ring 28, just after mounted, can not be fit
precisely along the groove on the impact bolt.
The edge come out from the groove.
(2) Insert the impact bolt on which the fluoride
ring 28 is attached, into repairing jig No.1R-214.
At this time the impact bolt has to be inserted
from the hole for [HR5001C]
And then, keep the impact bolt in the repairing jig
approx. 10 sec for correction of fluoride ring 28.
(3) Pay attention, not to damage fluoride ring 28, when
the impact bolt is inserted into tool holder.
O ring 23
Repairing jig No.1R-214
(Taper sleeve)
Fluoride ring 28
of which edge has come out
from the groove.
Fluoride ring 28 corrected
with repairing jig No.1R-214
Hole for
[HR5001C]
P 7 / 14
O ring 23