1. Manuals
  2. Brands
  3. GREAT PLAINS Manuals
  4. Drill
  5. 2S-2600
  6. Predelivery manual

GREAT PLAINS 2S-2600 Predelivery Manual

26-foot 2-section folding drill
Hide thumbs Also See for 2S-2600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operator's Manual
Table of Contents
Pre-Delivery Manual
Read the operator's manual entirely. When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception. Your life and
the lives of others depend on it
Cover illustration may show optional equipment not supplied with standard unit.
ORIGINAL INSTRUCTIONS
© Copyright 2019
Table of Contents
2S-2600 and 2S-2600F
26-Foot 2-Section Folding Drill
Manufacturing, Inc.
www.greatplainsmfg.com
Printed 04/25/2019
EN
EN
195-201Q

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2S-2600 and is the answer not in the manual?

Questions and answers

Related Manuals for GREAT PLAINS 2S-2600

Summary of Contents for GREAT PLAINS 2S-2600

  • Page 1 Table of Contents Pre-Delivery Manual 2S-2600 and 2S-2600F 26-Foot 2-Section Folding Drill Manufacturing, Inc. www.greatplainsmfg.com Read the operator’s manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it Cover illustration may show optional equipment not supplied with standard unit.
  • Page 2 Table of Contents Table of Contents...
  • Page 3 Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for taken in the preparation of this manual, Great Plains Manufacturing, Inc.
  • Page 4 2S-2600 and 2S-2600F Table of Contents 2019-04-25 Table of Contents 195-201Q...

  • Page 5: Important Safety Information

    2S-2600 and 2S-2600F Table of Contents Important Safety Information For your safety, thoroughly read Important Safety Information in the operator’s manuals before proceeding. Look for Safety Symbol The SAFETY ALERT SYMBOL indicates there is a potential hazard to personal safety involved and extra safety precaution must be taken.

  • Page 6: Avoid High Pressure Fluids

    2S-2600 and 2S-2600F Table of Contents Check for Overhead Lines Drill markers contacting overhead electrical lines can introduce lethal voltage levels on drill and tractor frames. A person touching almost any metal part can complete the circuit to ground, resulting in serious injury or death.

  • Page 7: Prepare For Emergencies

     Keep all safety decals clean and legible.  Replace all damaged or missing decals. Order new decals from your Great Plains dealer. Refer to this section for proper decal placement.  When ordering new parts or components, also request corresponding safety decals.

  • Page 8: Document Family

    Introduction Using This Manual Great Plains Manufacturing wants you to be satisfied with any new machine delivered by the Great Plains This manual was written to help you assemble and Trucking network. To ease the assembly task and prepare the new machine for the customer. The manual produce a properly working machine, read this entire includes instructions for assembly and setup.

  • Page 9: Unloading Truck

    2S-2600 and 2S-2600F Table of Contents Assembly The following headings are step-by-step instructions for assembling the drill. Begin with “Tools Required” and “Pre-Assembly Checklist” to make sure you have all necessary parts and equipment. Follow each step to make the job as quick and safe as possible and produce a properly working machine.

  • Page 10: Install Press Wheels

    2S-2600 and 2S-2600F Table of Contents Install Press Wheels Refer to Figure 2. 1. Remove 1/2 x 3 3/4-inch flange bolt (1) and flange lock nut (4) from each opener body. 2. Leave pivot bushing (2) in place and bolt press-wheel arm (3) to opener with 1/2 x 3 3/4-inch flange bolt (1) and lock nut (4).

  • Page 11: Install Ladder Mounts

    2S-2600 and 2S-2600F Table of Contents Install Ladder Mounts Refer to Figure 4 and Figure 5. Location of the ladder mounts depends on whether the drill has the small seeds option. • For drills without the small seeds option, refer to Figure 4 as a reference.

  • Page 12: Install Ladders

    2S-2600 and 2S-2600F Table of Contents Install Ladders The ladders mount between the lugs (5) of the upper mounts. Flat washers are placed between ladder side frame and the lugs. Hex head bolts install from the inside, to minimize obstructions to foot movement during climbing.
  • Page 13 2S-2600 and 2S-2600F Table of Contents Walkboard Inside End Reflectors Refer to Figure 7 Starting with the right walkboard, inside end: 1. Select two: (42) 838-266C DECAL REFLECTOR RED 2X9 Place the red reflector (42) on the end face of the walkboard mounting bracket.
  • Page 14 2S-2600 and 2S-2600F Table of Contents Ladder Reflectors and Decals Refer to Figure 9 Starting on the right walkboard: 6. Select one: (16) 195-561D WALKBOARD REFLECTOR MNT SINGLE and two of: (41) 838-265C DECAL REFLECTOR AMBER 2X9 (25) 802-633C RHSNB 1/4-20X5/8 PLT...

  • Page 15: Other Assembly Items

    2S-2600 and 2S-2600F Table of Contents Install Lights Refer to Figure 11 18 39 The red lights will already be install on the drill at the front of each inside end of the drill boxes. Starting on the right drill box: 1.

  • Page 16: Point Row Option

    2S-2600 and 2S-2600F Table of Contents Point Row Option If the point row option was ordered with the drill, the hydraulics and drill electrical lead are factory-installed. If the customer’s primary tractor is available, install the control module in the tractor cable and make the electrical connection.
  • Page 17 Choose a drill-hitch option that is compatible with your tractor drawbar. Refer to Figure 14 The 2S-2600 has three hitch options: • a clevis hitch, • a small-hole, single-strap hitch or;...
  • Page 18 2S-2600 and 2S-2600F Table of Contents Refer to Figure 15 and Figure 16 To adjust the drill hitch to match your tractor-drawbar height, mount tongue jack on side of tongue. Use jack to raise drill tongue so lowest hitch hole is 18 inches (45.7cm) above ground level with drill lowered to FIELD...

  • Page 19: Electrical Connections

    2S-2600 and 2S-2600F Table of Contents Electrical Connections Refer to Figure 18 Plug drill electrical lead into tractor seven-pin connector. Figure 18 26467 Lighting Connector Refer to Figure 19 If the drill is equipped with the point row option, mate the connector for the cab control.

  • Page 20: Hydraulic Hose Hookup

    Hoses with install a Great Plains kit, part number 194-143A. If you are an extended-cylinder symbol feed cylinder base ends. not familiar with your tractor hydraulics, consult your tractor Hoses with a retracted-cylinder symbol feed cylinder rod dealer.

  • Page 21: Bleeding Hydraulics

    2S-2600 and 2S-2600F Table of Contents Bleeding Hydraulics To function properly, the hydraulics must be free of air. If hydraulics have not been bled, they will operate with jerky, uneven motions and could cause wings to drop rapidly during folding or unfolding. If hydraulics were not...

  • Page 22: Bleeding Opener Lift Hydraulics

    2S-2600 and 2S-2600F Table of Contents Bleeding Opener Lift Hydraulics Refer to Figure 23 1. Review warnings, bleeding notes and system 7. Slowly supply oil to bottom side of pressure-control information on page 17. valves until oil begins to appear at remaining loosened hose fitting.

  • Page 23: Bleeding Fold Hydraulics

    2S-2600 and 2S-2600F Table of Contents Bleeding Fold Hydraulics Refer to Figure 21 1. Review warnings, bleeding notes and system 6. Slowly supply oil to base end of fold cylinders (line information on page 17. noted as “Pressure 2nd”) until oil appears at loosened hose fitting.

  • Page 24: Bleeding Transport Lift Hydraulics

    2S-2600 and 2S-2600F Table of Contents Bleeding Transport Lift Hydraulics Refer to Figure 23 1. Review warnings, bleeding notes and system 7. Extend transport-lift cylinders and remove cylinder information on page 17. lock channels. Completely cycle transport-lift hydraulics several times.

  • Page 25: Leveling The Drill

    2S-2600 and 2S-2600F Table of Contents Leveling the Drill To perform leveling, the drill must be hitched to a tractor, with at least the hydraulics connected. Raising openers on unfolded, unhitched drill will cause drill tongue to rise suddenly, which could cause serious injury or death.

  • Page 26: Toolbar Height

    2S-2600 and 2S-2600F Table of Contents Toolbar Height Refer to Figure 26 Toolbar height (1) above ground level (2) is factory set and normally does not require adjustment. If you tear down the drill for repair, or if the tool bar is visibly not level, spacer washers (3) on vertical pivot pins allow for a small amount of tool bar-height adjustment.

  • Page 27: Wing Box Alignment

    2S-2600 and 2S-2600F Table of Contents Wing Box Alignment 1. Place a block ahead of the wing gauge wheels. Refer to Figure 27 2. Pull forward against blocks to rock wing frames back. Pull forward until stop bolts (1) are firmly against toolbars.
  • Page 28 2S-2600 and 2S-2600F Table of Contents Install Final Accessories Acremeter Installation Refer to Figure 29 The acremeter (1) is supplied from the factory in a separate carton, to minimize risk of shipping damage. It is installed on the left end of the left drive shaft.
  • Page 29 2S-2600 and 2S-2600F Table of Contents Markers Markers are not factory-installed, due to vertical clearance requirements during shipment. An installation manual is provided, but does not include details for installation where a Two-Outlet Kit is also present. If a Two-Outlet kit is installed, observe these tips: •...

  • Page 30: Shaft Monitor

    2S-2600 and 2S-2600F Table of Contents Shaft Monitor Refer to Figure 33 If the drill was ordered with the optional shaft monitor, install the sensors and leads per the included installation manual. If the primary tractor is available, also install the display console in the cab.

  • Page 31: Specifications And Capacities

    2S-2600 and 2S-2600F Table of Contents Appendix Specifications and Capacities 2S-2600-5206 2S-2600-4275 2S-2600-3210 Row Count Row Spacing 6 in (15.4 cm) 7.5 in (19.1 cm) 10 in (25.4 cm) Main Seed Box Capacity 86.4 bushels (3045 liters) Tractor Requirements 110 hp minimum...

  • Page 32: Torque Values Chart

    2S-2600 and 2S-2600F Table of Contents Torque Values Chart Bolt Head Identification Bolt Head Identification Bolt Bolt 10.9 Size Size Grade 2 Grade 5 Grade 8 Class 5.8 Class 8.8 Class 10.9 ft-lb ft-lb ft-lb ft-lb ft-lb in-tpi ft-lb mm x pitch ⁄...
  • Page 33 2S-2600 and 2S-2600F Table of Contents Hydraulic Diagrams Transport Lift 18079 Fold 18079 2019-04-25 Table of Contents 195-201Q...
  • Page 34 2S-2600 and 2S-2600F Table of Contents Dual Markers 15605 Single Marker 15605 2019-04-25 Table of Contents 195-201Q...

  • Page 35: Two Outlet Conversion

    2S-2600 and 2S-2600F Table of Contents Two Outlet Conversion 15605 2019-04-25 Table of Contents 195-201Q...

  • Page 36: Opener Lift: Standard Closed-Center

    2S-2600 and 2S-2600F Table of Contents Opener Lift: Standard Closed-Center 23031 2019-04-25 Table of Contents 195-201Q...

  • Page 37: Opener Lift: Optional Open-Center

    2S-2600 and 2S-2600F Table of Contents Opener Lift: Optional Open-Center 23033 2019-04-25 Table of Contents 195-201Q...
  • Page 38 2S-2600 and 2S-2600F Table of Contents Point-Row LEFT RIGHT 27051 2019-04-25 Table of Contents 195-201Q...
  • Page 39 Table of Contents Table of Contents...
  • Page 40 Great Plains, Mfg. 1525 E. North St. P.O. Box 5060 Salina, KS 67402...

This manual is also suitable for:

2s-2600f

Table of Contents