Fsb - Samsung UP1500 800-A1 User Manual

UP1500 User's Manual
4.3

FSB

UP1500 800-A1
The FSB provides an emergency recovery mechanism when the primary firmware
image contained in flash memory is corrupted.
You can start the FSB manually. To manually start the FSB, perform the following
procedures:
1. Power Off system.
2. Set switchpack to FSB configuration as shown in section 2.2.1, "Firm-
ware Image Selection."
3. Power On system.
4. Insert UP1500 installation disk into the floppy disk drive.
5. Upgrade SRM Console.
Chapter 4 Software Support
4-24