UP1500 User's Manual
141.0 mm (5.550")
141.0 mm (5.550")
141.0 mm (5.550")
141.0 mm (5.550")
16.5 mm (.650")
16.5 mm (.650")
16.5 mm (.650")
16.5 mm (.650")
Figure 3-2
UP1500 Mounting Hole Specification
3.5
Rear Panel I/O Shield
UP1500 800-A1
304.8 mm (12.00")
304.8 mm (12.00")
304.8 mm (12.00")
304.8 mm (12.00")
The UP1500 rear panel connectors must be fitted with a suitable ATX Core
Design #6 I/O shield, as shown in Figure 3-3. Individual rear panel I/O connectors
are designated with letters. Each connector type and its description are listed in
Table 3-6.
Chapter 3 Electrical, Environmental and Physical Data
6.4 mm (.250")
6.4 mm (.250")
6.4 mm (.250")
6.4 mm (.250")
3-7