Table of Contents
Advertisement
MAINTENANCE
Doorbell
When dust and grime builds up on the camera lens and glass, it will affect the night vision
capability. The infrared light reflects off of the dust and grime, limiting the camera's "vision." Use
a microfiber cloth to regularly clean the camera or when night vision video is cloudy or unclear.
Reset
To reset the doorbell, press and hold the Reset button for 10 seconds
until the light around the button blinks rapidly
Upgrading the Firmware
The Video Doorbell Firmware will upgrade automatically or the SightHD app will notify you
when a new version is available.
Removing Video Doorbell from Bracket
Insert a small screwdriver or paper clip in between the
doorbell and the bracket release tab and push out.
— 40 —
Reset
Button
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AWF71D and is the answer not in the manual?
Questions and answers
Where do I install the SD card?
The ALC AWF71D comes with a 16GB microSD card pre-installed. The microSD card is used for saving recorded videos. If you need to install or replace the SD card, refer to the device's SD card slot, which is likely located inside or on the back of the unit.
This answer is automatically generated