FM AUTO STOP CHECK
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
: 75 kHz
: 1 kHz
: 35 dBu (EMF)
Use 75 ohm coaxial cable to connect signal generator and the
set. You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and scan the input FM signal with
4. Conﬁ rm that input frequency of A, B and C are detected and
automatic scanning stops.
When the station signal is received in good condition, automatic
FM TUNER CHECK