Sub Menus; Menu Groups; Accessing And Navigating The Menu Groups; Entering And Navigating A Sub Menu - Zaxcom URX100 User Manual

Zaxcom URX100

Sub Menus

Menu groups

The URX100 has five sub menu groups
Channel Preset - Sets the number of preset channels, and sets the frequency of each preset channel.
•
Scan - Is where the URX100 can scan the set RF spectrum.
•
Routing - Sets the routing of the received audio and the walkie feed to the desired headphone side.
•
Time Code - Changes the time code parameters of URX100.
•
Setup - Changes the parameters of the general operation on the URX100.
•

Accessing and navigating the menu groups

From in the main menu press the POWER / TC key three times quickly to access the six menu groups. Then
pressing the CH UP or CH DOWN key will cycle between the menu items.

Entering and navigating a sub menu

When landing on the desired menu group press the MENU key to enter that menu. Pressing the MENU key
again will cycle through the menu items.
To return to the top of the menu press the MENU key to cycle to the top or press and hold the MENU key for
1.5 seconds.

Exiting the extended menu

To exit the menus press the POWER / TC key 3 times quickly to return to the main menu.
9
Menu Navigation