Editing Your Voice Commands - Sony Ericsson K600i User Manual

Calling
4
Instructions appear.
the environments in which you want voice
answering to be activated. You can select
several alternatives.
To answer a call using voice
commands
When the phone rings, say "Answer" and the call
is connected.
To reject a call using voice
commands
When the phone rings, say "Busy". The call
is rejected. The caller is diverted to voicemail,
if activated, or hears a busy tone.

Editing your voice commands

You can edit all your voice commands saved in
Contacts. Select the contact you want to edit a
voice command for
to the relevant tab and edit your voice command.
To re-record a voice command
1
} Settings }
the
} Voice dialling } Edit
2
Select a voice command
3
Wait for the tone and say the command.
30
This is the Internet version of the user's guide. © Print only for private use.
} Continue
and select
} More } Edit contact. Scroll
General } Voice control
tab
names.
} More } Replace
Tips when recording and using voice
commands
If your phone cannot detect your voice command,
one of the following might have happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as
you do during a call.
• The voice command was too short – it should
be around one second long and more than one
syllable.
• You spoke too late or too soon – speak immediately
after the tone.
• You did not record the voice command when the
handsfree was attached – for voice control with
a handsfree kit, record when the handsfree is
attached.
• You used another intonation – use the same
intonation as in the recorded voice command.
Diverting calls
If you cannot answer incoming calls, you can
divert them to another number, for example,
your answering service.
When the Restrict calls function is activated, some
voice.
Divert calls options are not available.