Calling
Editing your voice commands
You can edit all your voice commands saved in
Contacts. Select the contact you want to edit a
voice command for
to the relevant tab and edit your voice command.
To re-record a voice command
1
} Settings }
the
} Voice dialling } Edit
2
Select a voice command
3
Wait for the tone and say the command.
Tips when recording and using voice
commands
If your phone cannot detect your voice command,
one of the following might have happened:
• You spoke too softly — try speaking louder.
• You held the phone too far away — hold it as you
do during a call.
• The voice command was too short — it should
be around one second long and more than one
syllable.
• You spoke too late or too soon — speak
immediately after the tone.
28
This is the Internet version of the user's guide. © Print only for private use.
} More } Edit
contact. Scroll
} Voice control
General
tab
names.
} More } Replace
• You did not record the voice command when the
handsfree was attached — for voice control with
a handsfree kit, record when the handsfree is
attached.
• You used another intonation — use the same
intonation as in the recorded voice command.
Diverting calls
If you cannot answer incoming calls, you can divert
voice.
them to another number, for example, your
answering service.
When the Restrict calls function is activated, some
Divert calls options are not available.
You can choose between the following divert options:
Divert always
•
When busy
•
the phone.
•
Not reachable
turned off or if you are unreachable.
No reply
•
within a specified time limit.
— divert all calls.
— divert calls if you are already on
— divert calls if your phone is
— divert calls that you do not answer