Silent Mode (Only The Fan Speed Reduction); Step Mode (Speed Reduction Of Fan And Compressor) - WATERKOTTE EcoTouch Ai1 Air Planning And Installation

Silent Mode (option)

11.2 Silent mode (only the fan speed reduction)

11.3 Step mode (speed reduction of fan and compressor)

05.06.2015
Copyright  2013 by: WATERKOTTE GmbH. Subject to changes.
In the operating mode, you have the choice between quiet running and
step mode.
This function reduces the fan speed and thus the operation sound of the
outdoor unit. Using an additional switch SW1 or a timer, this signal is sent
to the outdoor unit. The following example shows the circuit connection to
the plug contact CNDM. The operation of the outdoor unit depends on the
external operating conditions and requirements of the indoor unit, with
reduced fan speed.
The step mode reduces fan and compressor speed (performance, noise
and energy consumption) in three possible levels: 0 % (off), 50 % and
75 %. The steps are selected with the DIP switches SW7-1 and SW7-2 on
the control board of the outdoor unit. Using an additional switch SW1 or
timer, this signal is sent to the outdoor unit. The following example shows
the circuit connection
67 / 80