Sony SCD SCD-C2000ES Operating Instructions Manual page 8

Connecting a digital
component
When you connect an MD deck or another
digital component through the DIGITAL (CD)
OUT connectors, you can make a digital
recording.
To connect through the DIGITAL
(CD) OUT OPTICAL connector
Use an optical digital cable for this connection.
When connecting the optical digital cable to the
DIGITAL (CD) OUT OPTICAL connector,
push the cable plug in until it clicks into place.
Be careful not to bend or twist the optical cable.
Optical digital cable (not supplied)
ANALOG
2CH OUT 5.1CH OUT
FRONT SURR CENTER
L
L
R
R
WOOFER
To CD optical digital input connector
on an MD deck, etc.
Note
Only the audio signals of conventional CDs can be
output from the DIGITAL (CD) OUT OPTICAL
connector. Those of the Super Audio CD cannot be
output through the DIGITAL (CD) OUT OPTICAL
connector.
US
8
DIGITAL(CD) IR REMOTE
OUT
COAXIAL OPTICAL
IR
IN
SUB
To connect through the DIGITAL
(CD) OUT COAXIAL connector
Use a coaxial digital cable to connect the audio
components equipped with coaxial digital input
connectors.
Coaxial digital cable (not supplied)
ANALOG DIGITAL(CD)
2CH OUT 5.1CH OUT
OUT
COAXIAL OPTICAL
FRONT SURR CENTER
L
L
R
R SUB
WOOFER
To CD coaxial digital input connector
on an MD deck, etc.
Note
Only the audio signals of conventional CDs can be
output from the DIGITAL (CD) OUT COAXIAL
connector. Those of the Super Audio CD cannot be
output through the DIGITAL (CD) OUT COAXIAL
connector.
Connecting the AC power
cord
Connect the AC power cord to a wall outlet.
IR REMOTE
IR
IN