Table of Contents
Advertisement
Available languages
Available languages
When using another Sony CD
player in conjunction with this
player
You can set the supplied remote to be effective
on this player only by changing the command
mode of the remote.
To set the command mode of the
remote
• If the other player’s command mode can be
set:
Set the CD1/2 switch of this player’s remote
to CD1 (factory setting), and set the other
player’s remote to CD2.
• If the other player’s command mode cannot
be set:
Set the CD1/2 switch of this player’s remote
to CD2.
To set the command mode of this
player
1
Press MENU on the player.
2
Turn l AMS L (or press ./>
on the remote repeatedly) to select
“CD1/2 SEL”.
3
Press l AMS L (or ENTER on the
remote).
The current command mode appears.
4
Turn l AMS L (or press ./>
on the remote) to select “CD – 1” or
“CD – 2”, then press l AMS L (or
ENTER on the remote).
Playing Discs
Playing a Disc
The operations for normal play and the basic
operations during play are explained below.
1
Turn on the amplifier. Turn down the
volume level to the lowest.
2
Select the player position using the
input selector on the amplifier.
3
Press POWER on the player to turn on
the player.
4
Press A OPEN/CLOSE on the player to
open the disc tray, and place a disc on
the tray.
With the label side up
Disc number
5
To place other discs, press DISC SKIP
(or DISC SKIP +/– on the remote)
repeatedly and place the discs in the
order you want to play.
Each time you press the button, the disc tray
turns and you can place the discs in the
empty disc compartments. The player plays
the disc in front of you first.
6
Press PLAY MODE (or CONTINUE on
the remote) repeatedly to select ALL
DISCS or 1DISC Continuous Play
mode.
Each time you press CONTINUE on the
remote, “ALL DISCS” or “1 DISC”
appears in the display.
When you select
The player plays
ALL DISCS
All discs in the player
consecutively in the order
of disc number
1DISC
Only the disc you have
selected
continued
US
Page 9
Advertisement
Chapters
Table of Contents
