Removal Of Brackets On Modular Units; Conversion For Horizontal Right Applications Using A Slope Coil - Carrier FB4B Instruction Manual

COIL
SUPPORT
RAIL
SLOPE COIL
SKI
Fig. 4—Conversion for Horizontal Right Applications Using a Slope Coil
10. Remove two oval fitting caps from left side of the coil, access panel, and fitting panel.
11. Remove insulation knockouts on right side of coil access panel
12. Remove 2 oval coil access panel plugs and reinstall into holes on left side of coil access panel and fitting panel.
13. Install condensate pan fitting caps (from Step 10) in the right side of the coil door making sure that the cap snaps and seats cleanly on the
back side of the coil door. Make sure no insulation interferes with seating of the cap.
2 SCREWS
REAR CORNER
BRACKET
Fig. 3—Removal of Brackets on Modular Units
COIL MOUNTING
SCREW
DRAINPAN
REFRIGERANT
CONNECTIONS
—4—
BLOWER BOX
2 SCREWS
2 SCREWS
COIL BOX
PRIMARY DRAIN
SECONDARY DRAIN
A95293
BLOWER
ASSEMBLY
A03001