Al Edit Recording - Aiwa NSX-D7 Operating Instructions Manual

Aiwa compact disc stereo system operating instructions nsx-d7
Hide thumbs Also See for NSX-D7:
Table of Contents

Advertisement

Available languages

Available languages

m
While the disc compartment is opened with DISC CHANGE,
do not press buttons other than DISC CHANGE or A OPEN/
CLOSE. Doing so may cause malfunctions. In this case, reset
the unit referring "To reset" on page 28.
When loading an 8-cm (3-inch) disc, make sure to put it onto
the inner circle of the tray precisely. Otherwise, the disc may
be damaged or the disc compartment will not open. If it does
not open, please consult your Aiwa dealer for repair.
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
When transporting the unit, remove the discs from the trays.
When replacing the discs during play, do not replace discs other
than those facing you.
If you place a disc on the empty right inner tray, and then press
4
OPEN/CLOSE,
"ERROR"
is displayed
and the disc
compartment may not close. Remove the disc on that tray.
Never place here.
Use the remote control.
RANDOM play
All the tracks on the selected disc or on all the discs can be
played randomly.
REPEAT
play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — % lights up on the display.
RANDOMIREPEAT
play — RANDOM and -
light up on
the display
Cancel — RANDOM and G disappear from the display.
To play all discs, press +>
to start play.
To play a single disc, press DISC DIRECT PLAY, then press
one of the numbered buttons 1-5 within 3 seconds to start play.
m
During random play it is not possible to skip to the previously
played track with the U.
s
2
Press CD BLANK SKIP.
"CD BLANK SKIP ON" is displayed and a small dot will appear
in the display.
Small dot
Press +>
to start playback.
The silent portions between_tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fade-out
portion also will be skipped.
TD return to normal playback
Press CD BLANK SKIP again so that "CD BLANK SKIP OFF is
d splayed, and the dot in the display will disappear.
There may be a case where BLANK SKIP PLAY does not
function correctly.
BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING
(page 21), PROGRAMMED
EDIT
m
RECORDING (page 22), or PROGRAMMED PLAY recording
(page 15) or RANbOM PLAY recording (page 14).
-
ENGLISH
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx-nd7 uSx-wnd7

Table of Contents