On The Remote Control - Sony Walkman MZ-R91 Operating Instructions Manual

3
Flip the jog lever until the phrase you
want to erase appears, and then press
the lever.
"Erase!" appears and the phrase is
erased. If no phrase is stored in the
phrase bank, "EMPTY" appears in
the display.
To cancel the operation, press x or T
MARK.

On the remote control

Storing phrases while labeling
1
Do the procedure "On the remote
control" in "Labeling recordings"
(page 34) to enter a phrase.
2
After entering the phrase, press X for
2 seconds or more.
"Entry!" appears in the display and
the cursor flashes after the phrase you
just stored. You can then continue
with labeling operation.
z
You can store phrases from a previously labeled
track or disc.
Do the procedure "Relabeling recordings"
(page 35) and display the track or disc name
that contains the phrase that you want to store.
Press VOL +/– repeatedly to move the cursor to
the right of the phrase. Then press X for 2
seconds or more to store the phrase.
DISPLAY
X
control
x
Storing phrases using the EDIT
menu
1
Press DISPLAY for 2 seconds or
more.
2
Press the control towards . or
towards N • > repeatedly until
"Name Bank" flashes in the display,
and then press x.
3
Enter the phrase you want to store,
then press x for 2 seconds or more.
"Entry" appears in the display and the
phrase is stored.
Retrieving phrases stored in
the phrase bank
Searching for a phrase by displaying
the stored phrase one by one
1
Do the procedure "On the remote
control" in "Labeling recordings"
(page 34) until "
" : Name appears in the display.
Then press x.
2
Press X repeatedly until the first
phrase stored in the phrase bank
appears in the display.
3
Press the control towards . or
towards N • > repeatedly.
Pressing the control towards . or
towards N • > causes the phrases
stored in the phrase bank to appear
one by one. If you press X at this
time, the first phrase stored in the
phrase bank retrieved.
4
Press x while the phrase you want is
shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
: Name" or
37
-GB