Specifications; Entering Programming Mode - Paradox Magellan MG5050 Programming Manual

Specifications

MG5000 / MG5050
Power rating
Aux. power
Battery
Battery charging current
On-board zones
Bell output
On-board PGMs
Dimensions
Operating temperature
SP4000 / SP5500 / SP6000 / SP7000
Power rating
Aux. power
Battery
Battery charging current
On-board zones
Bell output
On-board PGMs
Dimensions
Operating temperature

Entering Programming Mode

WARNING: StayD Mode must be deactivated in order to enter programming mode. To deactivate StayD, press [
] + [ ].
USER CODE OFF
1. Press [ ].
ENTER
2. Enter your [
INSTALLER CODE
To modify codes, see System Codes on page 50.
3. Enter the 3-digit [
SECTION
4. Enter required [ ].
DATA
Magellan / Spectra SP
16.5 VAC (50 or 60Hz) minimum 20 VA (40 VA recommended)
600 mA typical, 700 mA maximum, fuseless shutdown at 1.1A
12 VDC, 4Ah/7Ah
350 mA
MG5000: 2
MG5050: 5
1A (fuseless shutdown at 3A)
MG5000: 2
MG5050: 4 (1+/- trigger)
All on-board PGMS are 100mA low-current outputs
MG5000: 14 x 10.4cm (5.5 x 4.1")
MG5050: 19 x 10.2cm (7.5 x 4")
0°C to 50°C (32°F to 122°F)
16.5Vac (50 or 60Hz) minimum 20VA (40VA recommended)
SP4000:
450mA, fuseless shutdown at 650mA
12Vdc, 4Ah/7Ah
SP4000: Limited by 1.1A supply current
(AUX consumption - no dedicated
battery current limit circuit)
SP4000: 4
SP5500: 5
1A (fuseless shutdown at 3A)
SP4000: 1
SP5500: 2 (all +/- trigger)
All on-board PGMS are 100mA low-current outputs
SP4000: 14 x 6.6cm (5.5 x 2.6")
SP5500: 19 x 8.9cm (7.5 x 3.5")
0°C to 50°C (32°F to 122°F)
] (default: 000000) or [
MAINTENANCE CODE
] you wish to program ([
ARM
SP5500 / SP6000 / SP7000:
600mA typical, 700mA maximum,
fuseless shutdown at 1.1A
SP5500: 350 mA
SP6000 / SP7000: 350 mA / 850 mA
SP6000: 8
SP7000: 16
SP6000: 2+(2 optional) (all +/- trigger)
SP7000: 4 (all +/- trigger)
SP6000: 19 x 8.9cm (7.5 x 3.5")
SP7000: 20.3 x 10.8cm (8 x 4.25")
] (no default). [
] and [ ] lights are ON).
STAY
] and [ ] lights flash.
ARM STAY
] + [ /
OFF MASTER
5