Labeling (Name); Moving Recorded Tracks - Sony Walkman MZ-N710 Operating Instructions Manual

For details and the remote control
operation, see page 25.

Labeling (Name)

1
Enter the menu and select "EDIT" -
"Name"
2
Select one of the following:
When labeling a
track
When labeling a
disc
The cursor appears in the display and the
track, group, or disc is ready to be labeled.
3
Turn the volume control repeatedly to
select a letter and press the jog lever.
The selected letter stops flashing and
the cursor moves to the next input
position.
The cursor flashes at the next input position.
Functions
To move the cursor to
the left or right
To change the letter to
the one before/next one
To enter a letter
To enter a name
To switch between
capital letters, small
letters, and numbers/
marks
To insert a blank space Press
To delete a letter
To cancel labeling
58
" : Name"
" : Name"
Operation
Slide the jog lever
(., >)
Turn the volume
control (VOL+, –).
Press the jog lever
(NX/ENT).
Press the jog lever
for 2 seconds or
more (NX/ENT).
Press P MODE/ .
+.
Press –.
Press x for 2
seconds or more.
4
Repeat step 3 and enter all characters
of the label name.
5
Press and hold the jog lever for 2
seconds or more.
For the details and the recorder
operation, see page 36.
Labeling recorded groups
1
Select " : Name" in step
"Labeling (Name)" (page 58) and do
steps 3 to 5 to label a group.
For the details and the recorder
operation, see page 47.
Re-labeling recordings
You can relabel recordings by following
the procedure of "Labeling (Name)"
(page 58).
For the details and the recorder
operation, see page 37.

Moving recorded tracks

1
While playing the track you want to
move, enter the menu and select
"EDIT" - "Move" - "
For example, "003 t Tr003" appears
in the display.
2
Slide the jog lever repeatedly until the
destination track number appears in
the display.
For example, "003 t Tr002" appears
in the display.
3
Press the jog lever to enter the
selection.
of
2
: Move".