Sony Walkman MZ-N710 Operating Instructions Manual page 18

3
Make connections and unlock the
control.
1
Connect the headphones/earphones
with the remote control to i.
Connect firmly
z
You can also charge the rechargeable battery by
connecting the AC power adaptor directly to the
recorder.
Connect the AC power adaptor to DC IN 3V on
the recorder, and then press x • CANCEL/
CHG while the recorder is stopped.
"Charging" and e appear in the display and
charging starts. Full charging takes about 2.5
hours. Charging is complete when e
disappears. Charging time may vary depending
on the battery condition.
Notes
• "Charging" and e may not appear in the
display immediately after you place the
recorder on the battery charging stand. The
indication will, however, begin flashing after a
few minutes and charging will begin.
• Charge the battery at a temperature of +5°C
(+41°F) to +40°C (+104 F).
18
2
Slide HOLD to the opposite direction of
the arrow (.) to unlock the controls.
HOLD
HOLD
Connect firmly
To i