Advertisement
Quick Links
Replacement Parts for "Single Point" Units
½'' PIPE
(5/8''OD)COMPRES
SION NUT AND
SLEEVE
PART# EX16, EX17
UP
INSTALL
THIS WAY UP
ONLY !
relay
RELAY
PART # EX250-
255
3/8'' COMPRESSION
ADAPTOR WITH NUT
AND SLEEVE
PART#EX68A,B,C
CONTROL BOARD
EX182DP
SPECIFY VOLTAGE
AND MODEL
ELEMENT CARTRIDGE
HEATER MODEL/ORDER REF.
CARTRIDGE REF #
SP2412 (120V)
EX610SP
SP3012
EX480SP
SP3512
EX410SP
SP3208 (208V)
EX1440SP
SP4208
EX1050SP
SP8208
EX520SP
SP35 (240V)
EX1650SP
SP55
EX1050SP
SP65
EX890SP
SP75
EX770SP
EX95
EX630SP
SP3277 (277V)
EX260SP
SP4277
EX1870SP
SP60
EX1280SP
SP80
EX960SP
SP90
EX850SP
SP100
EX760SP
INSTANT COMFORT...ENDLESS SAVINGS
"Single Point"
ELECTRIC INSTANTANEOUS WATER HEATER
INSTALLATION GUIDE AND OWNERS MANUAL
BEFORE ATTEMPTING INSTALLATION OF THIS UNIT OR MAKING ANY
ADJUSTMENTS TO THE UNIT, ALWAYS BE SURE CIRCUIT BREAKER IS OFF
TO PREVENT DANGER OF SERIOUS ELECTRIC SHOCK.
FAILURE TO GROUND THE SYSTEM MAY RESULT IN SERIOUS INJURY OR DEATH
INSTALLER/ CONSUMER RESPONSIBILITIES
READ THIS MANUAL CAREFULLY BEFORE ATTEMPTING TO INSTALL OR
OPERATE THIS WATER HEATER. IF THE SAFETY RULES ARE NOT FOLLOWED,
OPERATE THIS WATER HEATER. IF THE SAFETY RULES ARE NOT FOLLOWED,
THE UNIT WILL NOT OPERATE PROPERLY AND IT COULD CAUSE DEATH,
SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE.
WARRANTY OF THIS WATERHEATER WILL DEPEND
ON PROPER INSTALLATION AND OPERATION. THE WARRANTY
WILL BE VOID IF THE DESIGN HAS BEEN ALTERED IN ANY WAY
WHATSOEVER. THE MANUFACTURER OF THIS HEATER WILL NOT BE LIABLE
FOR ANY DAMAGES BECAUSE OF FAILURE TO COMPLY WITH THE INSTALLATION
AND OPERATING INSTRUCTIONS OUTLINED ON THE FOLLOWING PAGES.
THE INSTALLATION MUST CONFORM WITH THE INSTRUCTIONS IN THIS
MANUAL AND LOCAL CODES, OR INTHE ABSENCE OF
LOCAL CODES, WITH THE LATEST EDITION OF THE
NATIONAL ELECTRICAL CODE. THIS PUBLICATION IS AVAILABLE FROM
YOUR LOCAL GOVERNMENT, ELECTRIC CO., PUBLIC LIBRARY, OR BY
WRITING UNDERWRITERS LABORATORIES, 333 PFINGSTEN RD.,
NORTHBROOK, IL. 60062
IF YOU REQUIRE HELP OR HAVE ANY QUESTIONS RELATING TO THE
INSTALLATION OR PERFORMANCE OF THIS HEATER, PLEASE CALL
OUR TECHNICAL SERVICE DEPARTMENT TOLL FREE:1-800-543-6163.
HAVE THE INFORMATION LISTED BELOW BEFORE CALLING:
MODEL NO.___________SERIAL NO.___________INSTALLATION DATE_____
Eemax Inc., 353 Christian Street Oxford, CT 06478
TEL:1-800-543-6163, 203-267-7890, FAX: 203-267-7975, e-mail: eemaxinc@aol.com
®
UP
WARNING
Advertisement
Related Manuals for EemaX Single Point Series
Summary of Contents for EemaX Single Point Series
- Page 1 PART # EX250- INSTALLATION OR PERFORMANCE OF THIS HEATER, PLEASE CALL OUR TECHNICAL SERVICE DEPARTMENT TOLL FREE:1-800-543-6163. HAVE THE INFORMATION LISTED BELOW BEFORE CALLING: MODEL NO.___________SERIAL NO.___________INSTALLATION DATE_____ Eemax Inc., 353 Christian Street Oxford, CT 06478 TEL:1-800-543-6163, 203-267-7890, FAX: 203-267-7975, e-mail: eemaxinc@aol.com...
-
Page 2: Trouble Shooting
Turn on the main breaker. heater by Eemax. The unit is supplied with compression rings and nuts suitable for direct coupling to 3/8” copper or plastic piping. Do not use additional screwed 2) NO OR LOW WATER FLOW fittings or pipe dope. - Page 3 2) PLUMBING HOOK-UP 4) COMMISSIONING YOUR HEATER 1) The unit is supplied with compression fittings. USE THESE: DO NOT USE THREADED PIPE FITTINGS. DO NOT USE PIPE DOPE IMPORTANT OR TEFLON TAPE ON THIS INSTALLATION. Ensure the inlet filter supplied Before switching “on”...
- Page 4 (FULLY OPEN) TO AVOID ANY DANGER OF SHOCK. DESIRED TEMP.) Your Eemax heater must have its own independent circuit using insulated, UL listed, 3 wire cable of the appropriate size suitable for use up to 75 C protected by the correctly rated circuit breaker.