Long-Time Recording (Mdlp); When You Do Not Want "Lp:" Added Automatically At The Beginning Of A Track - Sony MZ-N1 OpenMG Jukebox NOTES on installing & operating Operating Instructions Manual

Long-time recording
(MDLP)
Select each recording mode according to
the recording time that you want.
Stereo recording is possible at 2 times
(LP2) or 4 times (LP4) the normal
(stereo) recording time. Monaural
recording at 2 times normal recording
time is also possible.
MDs recorded in monaural, LP2, or
LP4 mode can be played back only
on MD players or recorders with
monaural, LP2, or LP4 playback
mode.
REC
1
Press the jog dial.
2
Turn the dial until "REC MODE"
flashes in the display, and then press
to enter.
3
Turn the jog dial to select the desired
recording mode, and then press to
enter.
Recording
1)
mode
SP stereo
LP2 stereo
LP4 stereo
2)
Monaural
30
Jog dial
Display Recording
4)
window time
on the
3)
recorder
SP approx. 80
min.
LP2 approx. 160
min.
LP4 approx. 320
min.
MONO approx. 160
min.
1)
For better sound quality, record in normal
stereo)
stereo ( or LP2 stereo mode.
2)
If you record a stereo source in monaural, the
sounds from left and right will be mixed.
3) Items selected by the jog dial.
4)
When using an 80-minute recordable MD
4
Press and slide REC to the right.
5
Play the source you want to record.
To stop recording, flip the bar
towards x.
The recorder keeps the setting of the
recording mode when you record the next
time.
When you do not want "LP:"
added automatically at the
beginning of a track
When "LP:" is added to the beginning of a
track, "LP:" is displayed whenever an
attempt is made to play or edit the disc on
a unit that does not support MDLP mode.
This display lets you know that playback
or editing of the track is not possible on
the machine being used. The recorder is
factory set to add "LP:" ("Stamp ON") at
the start of each track.
1
While the recorder is stopped, press
the jog dial.
2
Turn the jog dial until "OPTION"
flashes in the display, and then press
to enter.
3
Turn the jog dial until "LP Stamp"
flashes in the display, and then press
to enter.
4
Turn the jog dial until "Stamp OFF"
flashes in the display, and then press
to enter.
If you want "LP:" added, select "Stamp
ON" in step 4, and then press the jog dial.