Moving A Track To A Different Group - Sony MZ-N1 OpenMG Jukebox NOTES on installing & operating Operating Instructions Manual

3
Turn the jog dial until "
flashes in the display, and then press
to enter.
The selected track number flashes in
the middle row of the display.
If the track has been labeled, press
> to make the track name appear
in the display. Press . to display
the track number again.
4
Turn the jog dial until the destination
track number flashes in the display.
For the example, since track C will be
moved to track "002", turn the jog
dial until "002" flashes in the display.
5
Press the jog dial to enter.
The track moves to the selected
destination track.
On the remote control
1 While playing the track you want to move
press DISPLAY for 2 seconds or more,
2 Turn the control repeatedly until "EDIT"
flashes in the display, and then press
enter.
The recorder plays the selected track
repeatedly.
3 Turn the control repeatedly until
" "
: Move flashes in the display and then
x
press to enter.
For the example, "003 t 003" appears in the
display.
4 Turn the control repeatedly until the
destination track number flashes in the
display.
For the example, "003 t 002" appears in the
display.
x
5 Press
to enter.
The selected track moves just before the
destination track.
To cancel moving
• On the recorder
Press CANCEL in step 4.
• On the remote control
Press DISPLAY for 2 seconds or more.
Note
: Move"
If the disc has group settings, turn group mode
on before moving a track. Moving a track with
group mode off may affect the structure of the
group.
Moving a track to a
different group
• Insert a disc with group settings.
x
to
On the recorder
1
2
3
4
GROUP
Jog dial
DISPLAY
Control
Press GROUP for 2 seconds or more
to turn group mode on.
While playing the track you want to
move, press the jog dial.
Turn the dial until "EDIT" flashes in
the display, and then press to enter.
The recorder plays the selected track
repeatedly.
Turn the jog dial until "
flashes in the display, and then press
to enter.
x
: Move"
continued
61