Supplied Components; Removing The Covers; Removing Parts Of The Insulation - Nibe F470 Installer Manual

Supplied components

Outside sensor
Earth cabling (4 pcs)
2 x tundish
Location
The kit of supplied items is placed on top of the product.

Removing the covers

Front cover
1
2
1. Remove the upper panel by pulling it straight out.
2. Remove the screws from the lower edge of the front
panel.
3. Lift the panel out at the bottom edge and up.
4. Pull the panel towards yourself.
NIBE F470
Room sensor
Expansion vessel with
holder
(supplied separately)
3
4
Side covers
The side covers can be removed to facilitate the installa-
tion.
1. Remove the screws from the upper and lower edges.
2. Twist the cover slightly outward.
3. Move the hatch backwards and slightly to the side.
4. Pull the cover to one side.
5. Pull the hatch forwards.
Removing parts of the
insulation
Parts of the insulation can be removed to facilitate the
installation.
Grip the handle and pull straight out as illustrated.
Chapter 2 | Delivery and handling 13