Testing; The Parts Name &Function Of Control Meter - Joy Sport Master User Manual

TESTING

1. Before using, please check the input voltage and the wires connecting the ground.Pull
the walking belt by hand to check whether it sensitive and noiseless or not.
2. Insert the plug of power, turn on the ON/OFF, the control meter sounds a "beep", all the
windows show zero. The walking belt doesn't move.
3. Press the START KEY, the treadmill begin to run in the lowest speed of 1.6km/h,observe
the treadmill and electronic meter whether run normally. In this time, the dot matrix display
a round course and simulate the position of sporter at any moment.
4. Press SLOW SPEED KEY and FAST SPEED KEY ,then observe them whether run
normally.
5. Press SLOW SPEED KEY 、FAST SPEED KEY and DIRECT SPEED KEY, then observe
them whether run normally.
6. Press STOP KEY and observe the treadmill whether stop running.
THE PARTS NAME &FUNCTION OF CONTROL METER
1. STOP button:
Press the button at first,and the treadmill will stop,retaining the data of display .The second
press,all the data will be deleted.
2. START button:
start the treadmill to work.
3. SLOW incline button
For decrease the incline in the running.
4. FAST incline button
For increase the incline in the running.
5. SAFTEY switch
6. FAST speed button
<5>