Joy Sport Master User Manual page 11

go out, there's no use to increase and decrease the volume by (VOLUME+)、(VOLUME-).
3. Fan switch
The function of fan is to expel the neagative and oxyen ion from the inner of electronic
meter as soon as possible. If don't start the fan, the speed of venting will be decreased.(But
don't influnce the function of fan largely);press one time is begain and the indicator light
bright,press again is over and the indicator light go out.
4. Incline set :
Press incline set button will enter the state of automatic incline program, and the number of
program display in the first one of incline window. Press this button continuously, there are
five kinds of fixed programs to choose, and each one includes 20 segments incline data.
The program will switch the next segment after running per 200m.After one program, the
treadmill will run 4000m.
5. Program set:
Press programs set continuously, there are eight kinds of programs to choose: three kinds
(P1、P2、P3) need to workout by person, the other five kinds (p4、P5、P6、P7、P8)
are automatic programs, the icons of eight kinds programs display all on the dot matrix
window.
Under P1program is pulse control speed set: here the pulse window flicker, the target value
is 100 times per minute, the speed value is 2.8km/h, press slow and fast speed button
can change the target value of pulse(If not change the target value is seen as the pulse
control speed isn't set),here press start button ,the set data is accepted and adjust the speed
according to contrast the sporter's pulse with the pulse of set automatically, so the sporter's
actual pulse will keep on the target value.(Note:Many factors influnce the test of pulse,so the
data is for reference only, the max running speed is 6km/h in this mode, the scope of pulse
control speed is 50 times per minute—160 times per minute.
Under P2、P3 programs are time and calorie set, change the time and clorie target value
through fast and slow speed button on the opposite flicker windows in the same method.(If
the target value is zero seen as it isn't set), here press the start button,the data is accepted
the target value of time and clorie is decreased after starting until zero,the electronic meter
send a moo sound and begin to add number.
Under the situation of pulse control speed isn't set,after starting can fast and slow speed by
arbitrarily and use the direct button; under the pulse control speed is set conditon,if time and
clorie are set or one of them is set, after starting can only speed up to 6km/h and can't use
the direct button.
P4—P8 is the programs of automatic workout,sporter can choose the sport pragram suit to
<7>