Leaveling&Power; Know Your Treadmill - Joy Sport Master User Manual

masts or any forward and back play in the console assembly or handlebars. If there is
any play in these areas, the treadmill has not been properly assembled. To prevent
damage to the treadmill, the assembly instructions must be reviewed and corrective
actions should be taken.
LEVELING
The treadmill should be level for optimum use. Once you have placed the treadmill
where you intend to use it, raise or lower the adjustable levelers located on the treadmill
base frame. Once you have leveled the treadmill, lock the levelers in place by tightening
the nuts against the frame. To assure the treadmill is level, a carpenter's level is
recommended.
TURN POWER ON
Make sure that your treadmill is properly connected to a power outlet. The on/off switch
is located next to the power cord. Flip this switch to the "on" position, so that the switch
is lit. You will hear a beep and the console will light up.
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt. Place your feet on
the side rails before starting the treadmill. Start walking on the belt only after the belt has
begun to move. Never start the treadmill at a fast running speed and sttempt to jump on!

KNOW YOUR TREADMILL