Panel Facilities And Specifications - Hitachi DV-P2E Service Manual

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES
FRONT PANEL
STANDBY indicator
—OFF_STANDBY/ON
POWER switch
REAR PANEL
Digital Output Jack (Coaxial)
This is used for output of the digital audio signal
recorded on CDs and Video CDs. Depending on the
components you connect this digital output to, noise
may be generated.
When connecting to an AC-3 compatible component,
use the PCM/ jack. (Refer to the chart on the
right.)
Video output jack
48
Disc illumination
Turned off when a disc other
than a DVD is played back.
Disc table
ÛN¿◊<x
DVD PLAYER
STANDBY
POWER
'
FL OFF
DIGITAL VIDEO
Display OFF button
(FL OFF)
Regular AV amp
Your
amp
AC-3 compatible
amp
Optical Digital Output
Audio optical digital output. Switchable between
PCM/DOLBY DIGITAL and PCM output.
DIGITAL OUT
PCM/Ÿ PCM/Ÿ(OPT)
1 2
S-Video output jack
Open/Close 0 button
Remote sensor
ANGLE LAST MEMORY DOLBY
96 kHz GUI
DIGITAL
TITLE CHP/TRK REMAIN TOTAL
Reverse 41
button
Display window
Coaxial Connect to the coaxial jack, and select PCM from the menu.
Optical Connect to the optical jack, and select PCM from the menu.
Coaxial Connect to the PCM/
Optical Connect to the optical jack, and select PCM/DOLBY DIGITAL from the menu.
AUDIO OUT
R L
VIDEO OUT S-VIDEO OUT
1
TV SYSTEM
NTSC PAL AUTO
2
Audio output jacks
There are two sets of outputs, 1 and
2, which you can simultaneously
connect. Connect 1 to the TV, and 2 to
your AV amp.
Play/Pause 6 button
0
4 1 ¡ ¢
7 £¥8
with
Stop 7 button
Forward ¡¢ button
jack, and select PCM/DOLBY DIGITAL from the menu.
TV SYSTEM Switch
AC IN
Power cord connection terminal.