Step 3: Connecting The Player - Sony MDP-V9K Operating Instructions Manual

Step 3
Connecting the player
Television hook-up
To play LDs or VIDEO CDs, hook up a television to the player. Take out the supplied
audio/video connecting cable (yellow, red, and white plugs). Use this to connect the player
to the television. Once you have hooked up the television, set the input selector on the TV to
"Video." Before connecting or disconnecting any cables, turn off all equipment.
If your TV has an S video input jack, use a YC-15V S Video Connecting Cable instead of the
supplied video cable to connect the player to get a better picture.
Audio/Video
Cable (not supplied)
Note
To view a PAL VIDEO CD, the COLOR SYSTEM selector on the rear of the player should be set to the
appropriate position, according to your TV system. See "COLOR SYSTEM selector setting " on page 7.
6
-EN Getting Started
VCR
Audio/Video
Cable (supplied)
OPTICAL
COLOR SYSTEM 1
1 (VIDEO CD)
AUTO
DIGITAL
PAL RF OUT 2
(AC-3)
NTSC
2
R L
AUDIO VIDEO
MIC
DIGITAL OUT LINE OUT
VIDEO
L
AUDIO
R
LINE IN
1 2
S VIDEO OUT
Yellow plug / Video In
Red & White
plugs / Audio In
/ S Video In
YC-15V S Video Cable
(not supplied)
OFF ON
ATT
MDP-V9K.3-856-640-13 ( En , C1, C2)
Television
to AC outlet