Step 3: Connecting The Player - Sony AVP-800 Operating Instructions Manual

Step 3
Connecting the player
Television hook-up
To play LDs, CD-Gs, or VIDEO CDs, hook up a television to the player. Take out the
supplied audio/video connecting cable (yellow, red, and white plugs). Use this to connect
the player to the television. Once you have hooked up the television, set the input selector on
the TV to "Video." Before connecting or disconnecting any cables, turn off all equipment.
Audio/Video
Cable (not supplied)
Television/VCR hook-up
Connect the player to the VCR's inputs when:
– the video inputs of the TV are already used for the VCR or a similar machine.
– the TV has only an antenna input.
When you connect this player using the VCR's inputs, do not use the LINE IN jacks of the player to
connect the VCR because doing so will cause interference with the sound or picture.
Notes
• Make sure all equipment is turned off before connecting or disconnecting any cables.
• Connection methods may differ; when in doubt about a connection, consult the TV or VCR
• If the sound or picture is disturbed by noise, try moving the equipment farther apart.
• Firmly insert plugs into the jacks. A loose connection may cause noise.
• To prevent interference with TV broadcast reception, turn off all equipment connected but not currently
• If the TV only has a monaural phono jack for audio input, use a Connecting Cable (not supplied).
6 Getting Started
-EN
LINE IN
VIDEO
L
AUDIO
R
VCR
R L R L
LINE IN AUDIO VIDEO AUDIO VIDEO
LINE OUT 1 LINE OUT 2
VIDEO
L
AUDIO
R
Video Out jack
Audio Out jacks
VCR
Antenna
Input jacks
Input
(Video/Audio)
Connect to the external video/audio inputs of a VCR.
manufacturer's manual.
in use.
R L R L
AUDIO VIDEO AUDIO VIDEO
LINE OUT 1 LINE OUT 2
Audio/Video
Cable (supplied)
Yellow plug / Video In
Red & White
plugs
OFF ON
ATT
VHF Out
terminals or
Video/Audio
Out jacks
OFF ON
ATT
to AC outlet
Television
/ Audio In
Television
AVP-800.3-800-709-31 [ En, C ]