Advertisement
7. Install the latest version of firmware for the SESUB-PAN-T2541 EVK Module.
Select "Program CCxxxx SoC or MSP430" from the "What do you want to program?"
dropdown
Make sure that the CC-Debugger is highlighted in the System-on-Chip menu
Select the "SP13808_FW_v0r52_STD.hex" file from the firmware folder on the TDK
Products Selection Guide USB drive in the Flash Image section
Make sure "Erase, program and verify" is selected under the Actions menu and click
"Perform Actions"
*Note if firmware fails to update, check the hardware connections and repeat installation.
Note: For additional information or any questions regarding the CC-Debugger, please refer to
the TI CC-Debugger User's Guide: http://www.ti.com/lit/ug/swru197h/swru197h.pdf.
Advertisement
