Advertisement
Using the SESUB-PAN-T2541 EVK with the TI CC-Debugger
Needed:
SESUB-PAN-T2541 EVK
TI CC-Debugger
o The CC-Debugger must be purchased separately.
PC (Windows OS)
SmartRF Flash Programmer
o TI's Flash Programmer software "swrc044s.zip" (V1.12.7 5/6/2013) is included
within the firmware folder on the TDK Products Selection Guide USB drive
o The latest version of this software can also be downloaded through TI's
website by searching "SmartRF Flash Programmer". –
1. Download and install the SmartRF Flash Programmer from the TI website or from the
"swrc044s.zip" file on the TDK Products Selection Guide USB drive. Search
"SmartRF Flash Programmer" on
the swrc044s.zip file.
2. Connect the CC-Debugger to the SESUB evaluation module. Make sure to connect
the ribbon cable in the appropriate direction. If the cable is connected incorrectly, the
hardware may be damaged.
www.ti.com
and click "Get Software" to download
www.ti.com
Advertisement
