Advertisement
5. Select 'TDK BLE Smart Tag' from the main screen of the TI BLE Multitool App.
Notice the two buttons near the top of the screen, the device information in the
middle, and the RSSI value near the bottom.
6. Push SW1 or SW2 to see the respective buttons on the screen of your iOS device
change position.
SW1
SW2
This value will change as the iOS device and
the SESUB-PAN-T2541 evaluation module
are moved closer or further from one another.
As the evaluation module is moved closer to
the iOS device, the RSSI value becomes
larger, and as the evaluation module is moved
further from the iOS device, the RSSI value
becomes smaller.
SW1 is pressed
SW2 is pressed
Advertisement
