Observint N16 Quick Setup Manual page 8

Hide thumbs Also See for N16:
Table of Contents

Advertisement

If changing the DST settings, consider the following:
DST: Enable if Daylight Saving Time (DST) is observed in your region.
Time Offset: Select the amount of time to offset for DST
Time Mode: Choose to set the daylight saving time in weeks or in days
Start Time/End Time: Set the start time and end time for daylight saving.
4.
Click Next to continue.
5.
The camera menu allows you to add IP cameras on the network to the NVR. Click Search to search IP cameras in the same network.
Choose the IP camera(s) you want to add.
Choose the camera in the list on the left that you want to add, and then click the blue arrow to add it.
6.
In the settings menu, enter the camera username and password, and then click Add.
7.
a.
You can also click the green dot with the + icon to add a camera.
8
www.Observint.com
Click Search to find IP cameras, and then click one of the IP camera in the device list.
b.
c.
Enter the parameters for the camera in the menu at the bottom.
IP Address/Domain: IP address or domain name of the IP camera
Alias: Name of the IP camera
Position: Position to display the camera name on the screen.
Port: Port of the IP camera
Protocol: Choose the protocol of the IP camera from the dropdown menu User Name: User Name of the IP camera
Password: Password of the IP camera
Bind channel: Choose a channel of the NVR you want to attach to.
d.
Click Add.
8.
Click Next to continue.
9.
In the Disk menu, you can configure how your disk (HDD) will be used. The Overwrite (Auto) feature enables you to always keep the
previous (optional) days of data written to the HDD when the disk becomes full, and Format initializes the HDD for use in the recorder
and erases all data on the disk. If you installed HDDs in your recorder, it is strongly advised to format these drives before using your
recorder.
a.
To configure the HDD for Overwrite:
i.
Check the select box for the HDD you want to configure from the list above.
ii.
Open the Overwrite drop down list, and then select Auto or the number of days you prefer.
b.
To format an HDD:
© 2019 Observint Technologies. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

N32N4N8

Table of Contents