Feed Function - Wuhan Huazhong Numerical Control Co., Ltd HNC-18iT v4.0 Programming Manual

1.3 Feed Function
1.3 1.3 1.3 Feed Feed

Feed Function

Function Function
- Feed refers to an operation in which the tool moves at a specified speed to cut a
workpiece.
- Feedrate refers to a specified speed, and numeric is used to specified the feedrate.
- Feed function refers to an operation to control the feedrate.
For example:
F2.0 //feed the tool 2mm, while the workpiece makes one turn
Tool
Chuck
Figure 1.6 Feed Function
6
1. General