MARUTI SUZUKI Zen Supplementary Service Manual page 33

0B-14 MAINTENANCE AND LUBRICATION
Left-hand steering
vehicle front
Tire and Wheel Disc Inspection
Tire inspection
1) Check tire for uneven or excessive wear, or damage. If defec-
1. Wear indicator
2) Check inflating pressure of each tire and adjust pressure to
Wheel disc inspection
Inspect each wheel disc for dents, distortion and cracks. A disc in
badly damaged condition must be replaced.
Tire rotation
Right-hand steering
Rotate tires as shown in figure to equalize wear.
vehicle front
Wheel bearing inspection
1) Check front wheel bearing for wear, damage, abnormal noise
2) Check rear wheel bearing for wear, damage abnormal noise or
Drive Shaft (Axle) Boot Inspection
Check drive shaft boots (wheel side and differential side) for leak-
age, detachment, tear or any other damage.
Replace boot as necessary.
tive, replace.
specification as necessary.
NOTE:
Tire inflation pressure should be checked when tires are
cool.
Specified tire inflation pressure should be found on tire
placard or in owner's manual which came with vehicle.
or rattles. For details, refer to Section 3D.
rattle. For details, refer to Section 3E.