USING THE PROJECTOR
Setup HDMI Link settings menu
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control
them on the same power on or power off status using the HDMI Link control feature in the projector's
OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature
in a typical configuration, your DVD player may be connected to the projector through an amplifier or
home theater system.
Default is Off. Select "On" to enable HDMI CEC function.
Setup HDBaseT control menu
Enable or disable the Ethernet feature.
On: Choose "On" to enable HDBaseT port connection and disable LAN port connection.
Off: Choose "Off" to use the LAN port connection.
Enable or disable the RS232 feature.
On: Choose "On" to enable HDBaseT port connection and disable RS232 port connection.
Off: Choose "Off" to use the RS232 port connection.
Set the HDBaseT Mode.
Auto: The projector will automatically switch to the HDBaseT mode when it detects a signal from the
HDBaseT: The projector is switched to the HDBaseT mode.