IMPORTANT Please read this manual carefully before using the crane scale. Table of content Safety guide--------------------------------------------------------------------------------------2 Chapter 1. Product Description -------------------------------------------------------------3 Chapter 2. Use Method------------------------------------------------------------------------3 2.1 Information on the panel-----------------------------------------------------------------------------------3 2.2 Operation------------------------------------------------------------------------------------------------------4 1. Tare------------------------------------------------------------------------------------------------------------4 2. Tare cancel--------------------------------------------------------------------------------------------------4 3. Accumulation function------------------------------------------------------------------------------------4 4.
Safety guide Read carefully the following instruction and advice before using this scale. Over-loading this scale is harshly prohibited Refrain from long-time loading that could lead to excessive fatigue on loadcell used inside the scale. Excessive fatigue on loadcell would decrease the accuracy and shorten the life of scale.
Chapter 1. Product Description C9 digital electronic crane scale is high accuracy, one-side direct display measuring unit which combines load cell and power supply together. It can be directly hung on the hook of a hoist and ensure the scale to complete the tasks of loading and weighing goods synchronously. The screen is made up of super-bright tube (LED), which can be easily seen in 25 meters.
Page 6
(4) View of outline of figure: (5) View of remote controller:...
Chapter 3. Calibration 3.1 Illustration: When scale is stable, press [Func] and press [Enter], it displays parameter code XX. Press “↑” “↓” “←” “→” to choose code 09 and press [Enter], which displays “SET” and entering calibration status. Step 1: Setup parameter (e.g.: Max capacity 5t, standard weights 4t) After displaying “---SET---”, operate as table 3-1 as followed.