Advertisement
Quick Links
Advertisement
Related Manuals for Kewtech Fuse Finder 2
Summary of Contents for Kewtech Fuse Finder 2
- Page 1 Fuse Finder 2 User Manual kewtechcorp.com...
-
Page 2: Battery Installation
2. Battery installation 1. Safety Warning The Fuse Finder 2 receiver is powered by a 9V Alkaline battery (not supplied) type PP3/MN 1604/6F22 or equivalent. The Kewtech Fuse Finder 2 is designed for use by suitably qualified To install a battery remove the screw (take care not to lose it!) and the personnel familiar with electrical supply systems. - Page 3 ‘RCVR ON’ LED indicating that the scanning function is in progress. To obtain the best results from your Fuse Finder 2 it is helpful to understand that the signal strength indicator is comparative rather than absolute. This means Push and immediately release the switch when the receiver is on –...
- Page 4 7. Advice for best performance 6. Fuse finding process The scanning head uses a ferrite transducer to detect the signal and, like a Plug the transmitter into the socket under test and switch the socket on. The red portable radio, varying the angle at which the receiver is held in relation to the LED on the transmitter should light.
- Page 5 Kewtech Corporation Limited Midas House, Unit 2b, Stones Courtyard, High Street, Chesham, Bucks HP5 1DE T: 01494 792 212 F: 01494 791 826 E: sales@kewtechcorp.com kewtechcorp.com...
-
Page 6: Specifications
FUSEFINDER PRODUCT DATA SHEET FUSEFINDER • Transmitter to inject a high frequency signal on the circuit under test • Receiver to detect circuit with signal at the distribution board • Clear LED indication of signal strength • Receiver auto-tunes sensitivity •...
Need help?
Do you have a question about the Fuse Finder 2 and is the answer not in the manual?
Questions and answers