Using Ktsync Keyboard - Ios - KoamTac KDC300 Quick Manual

3.4 Using KTSync Keyboard – iOS
Once your KDC is connected to KTSync, you can use your KDC as a keyboard.
a) Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards > Add New Keyboard...
> Select the KTSync keyboard to be added. (Fig. 6)
b) Select the KTSync Keyboard and toggle the switch to Allow Full Access. (Fig. 7)
c) Open the application you want to scan into and tap on the screen, so the on-screen keyboard appears.
d) Press and hold the globe icon located to the left of the spacebar.
e) Select the KTSync Keyboard and begin scanning. (Fig. 8)
Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work.
See Reference Manual for more detailed information.
Visit store.koamtac.com
< Fig. 6 >
to purchase additional KDCs and accessories.
Quick Guide
< Fig. 7 >
< Fig. 8 >
KDC300
QG_KDC300_20190523 p6