Battery Charging & Recharging - Vileda VR 102 User & Care Manual

BUTTONS AND CLEANING MODES
1a POWER BUTTON
Press the "POWER" button to switch the robot on and off.
STANDBY
Standby means, the robot's main power is turned on, and the robot is ready to use. The power button is
pulsating slowly. When the robot is cleaning, press the "POWER" button on the main body of the robot to
pause the robot and enter standby mode.
SLEEP MODE
In sleep mode the robot will save energy, but is not powered off. In order to save power, you can turn the robot
into sleep mode from standby mode via either of the following methods:
Press the "POWER" button on main body.
Robot will automatically enter sleep mode if the power is low or after 5min in standby mode.
In working or standby mode, press the "POWER" button to switch off the robot.
The power button also displays the charging status and error codes, explained in chapters "battery charging
& recharging" and "troubleshooting".
Note: VR ONE:
Press the "POWER" button to switch on the robot. During cleaning press the "POWER" button again to switch it off.
1b*. AUTO-CLEANING BUTTON
In standby mode, press the "AUTO" button to enter the auto cleaning mode.
The robot will automatically choose the optimal cleaning pattern, consisting of an iteration of auto, zig-zag
and spiral movement pattern.
In auto cleaning mode, press the "AUTO" button again to enter standby mode.
1c*. QUIET BUTTON
In standby mode, press the "QUIET" button to enter the quiet cleaning mode for more comfort while cleaning.
The robot will automatically choose the optimal cleaning pattern and reduce its noise level, by reducing speed
and suction power for a more quiet product performance.
In quiet cleaning mode, press the "QUIET" button again to enter the standby mode.
3. BATTERY CHARGING & RECHARGING
Battery indication displayed in the power button:
When charging: plug the adapter into the robot and on the other side to the power socket, as indicated in the
quick start guide on page 2.
LED indication
Description
LED indication
Description
Tips to extend the battery life:
• Before first use, charge the robot for 5 hours.
• Charge the robot as soon as battery power is low.
• If the robot is not to be used for a long time, fully charge the battery, turn the power switch off, remove and store
it in a cool, dry place.
• If the robot is not to be used for 3 months or longer, charge it directly by the power adapter for 4-5 hours.
Power button is 4x
flashing red
Connection of battery is
not good.
Contact the Vileda
service (address see last
page)
During operation and standby mode
Power button is flashing slowly red
Battery power is low. Please charge the device
Power button flashing
red, while charging
Robot is charging
Power button flashing
white, while charging
Robot is fully charged
G
11