Safety Precautions - BIRD ECONOLOAD 8730 Series Operation Manual

Load resistor
Hide thumbs Also See for ECONOLOAD 8730 Series:
Table of Contents

Advertisement

Safety Precautions

The following are general safety precautions that are not necessarily related to any specific part or procedure, and
do not necessarily appear elsewhere in this publication. These precautions must be thoroughly understood and
apply to all phases of operation and maintenance.
Operating Personnel must at all times observe general safety precautions. Do not replace
components or make adjustments to the inside of the test equipment with the high
voltage supply turned on. To avoid casualties, always remove power.
Do not attempt to remove the RF transmission line while RF power is present.
Under no circumstances should any person reach into an enclosure for the purpose of
service or adjustment of equipment except in the presence of someone who is capable of
An uninterruptible earth safety ground must be supplied from the main power source to
test instruments. Grounding one conductor of a two conductor power cable is not
sufficient protection. Serious injury or death can occur if this grounding is not properly
Personnel working with or near high voltages should be familiar with modern methods of
Observe general safety precautions. Do not open the instrument with the power on.
WARNING
Keep Away From Live Circuits
WARNING
Shock Hazard
WARNING
Do Not Service Or Adjust Alone
rendering aid.
WARNING
Safety Earth Ground
supplied.
WARNING
Resuscitation
resuscitation.
WARNING
Remove Power
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECONOLOAD 8730 Series and is the answer not in the manual?

Table of Contents