Zte ZXHN H167A User Manual page 9

Interface/Button
WLAN
WPS
 Rear panel
Figure 3-3 shows the interfaces and buttons on the back panel of the ZXHN
H167A.
Figure 3-3 The Back Panel
Interface/Button
On/Off
Power
Reset
LAN1–LAN4
DSL
Description
After pushing the button, the WLAN function will be
enabled or disabled.
After pushing the button, the WPS function will be
enabled.
Description
Power switch, to power on or power off the device.
Power supply port, It is connected to the power
adapter.
During power ON period, hold on this button for more
than 5 seconds to reset the current settings to the
factory default setting, and then the system restarts
automatically.
RJ-45 port. It is used to connect the modem to
computer, STBs or other network devices.
RJ-11 port, it is used to connect the VDSL2, or ADSL2+
uplink access network.