Zte ZXHN H167A User Manual page 8

Indicator
2.4GHz
5GHz
WPS
 Side panel
Figure 3-2 shows the interfaces and buttons on the side panel of the ZXHN
H167A.
Figure 3-2 The Side Panel
Status
Solid red
OFF
Flashing
green
Solid green
OFF
Flashing
green
Solid green
OFF
Slow
Flashing
green
Fast
Flashing
green
Solid green
Description
due to idle
dial-on-demand is enabled. Green LED
indicates that the routing connection state
is up.
The WAN connection is dialing up or fails
to get online.
Device attempted to become IP connected
and failed (no DHCP response, no PPPoE
response, PPP authentication failed, no IP
address from IPCP, etc).
2.4GHz WLAN RF switch is off.
Currently in data transmission. Flashing
frequency indicates 2.4GHz Wi-Fi network
traffic.
2.4GHz WLAN RF switch is on.
5GHz WLAN RF switch is off.
Currently in data transmission. Flashing
frequency indicates 5GHz Wi-Fi network
traffic.
5GHz WLAN RF switch is on.
No WPS access or the WPS access of the
terminal exceeds 5 minutes.
WLAN terminal is in WPS accessing
process.
The WPS accessing of the WLAN terminal
is Faulty.
WPS function is on.
timeout when PPP